Woodis the most important building material for the sunroom. The manufacturers only use glued laminated timber. It has not grown in one piece but is glued together from thin boards. The advantage of it is: The profiles do not twist or curve and withstand higher loads. Wood also insulates the heat better than any other material. However, the natural building material also has disadvantages and these are: Most types of wood are not very weather-resistant and regularly need a new protective coating, especially outdoors. Wood is also only partially suitable for plant-rich add a sunroom in Fairport, NY with high humidity. Wood creates a very homely atmosphere, but to achieve the same stability as with steel or aluminium construction methods, you need a much more solid construction even when using hard tropical wood.
Aluminium enables sunrooms with large glass surfaces, as the metal is light and stable. Because it does not rust, there is no need for a protective coating. Inner and outer profiles should only be connected by an insulating plastic insert, otherwise, there will be heat losses due to the high conductivity. Anyone who opts for an aluminium sunroom will find well-engineered solutions on the market. Most manufacturers offer prefabricated components that are quick and easy to process. Composite construction methods made of wood and aluminium have proven particularly effective: The load-bearing wooden structure is covered on the outside with rear-ventilated aluminium panels. There are also pane holders made of aluminium that are screwed onto internal wooden supports.
Plastic profiles have a steel core that is usually coated with PVC to protect against corrosion. The biggest advantage of this variant is the low prices and steel is cheaper and easier to process than aluminium. But this also has a few disadvantages, because the profiles have a relatively high weight and are not ideal for larger self-supporting surfaces. In addition, like aluminium, they must be insulated with special plastic inserts. Another disadvantage is that the plastic surface often loses its shine over the years and turns a little grey. There are now some system providers who have helped the plastic conservatory to a renaissance through special welding techniques and system construction methods, and who are thus also able to realize larger construction projects.